How to put Fishing line on a baitcasting reel step by step

It is not so easy to put a new fishing line onto your fishing baitcasting reel. So it is very important to follow the steps below in order to become an expert for putting lines to a baitcaster reel and using it to catch fish more efficiently.

1.Disposal of old fishing line

If there is any old fishing line then you will have to remove it carefully without doing any harm to the reel. It can endanger water flow, fish and aquatic life if you toss it in water without removing old one.

2. Thread the fishing line

Let us start with the threading fishing line through the line guides of reel and rod. You should be careful not to miss any of the line guides as it will create extra pressure on the line.

Pro-tip: Always thread from the end of rod very carefully and slowly that will not miss you any line guide. This is an important tip for threading onto baitcasting reel.

3. Loop the end of line

Slowly and gently loop the end of line toward the baitcasting reel and then tie a knot properly securing it in its place. Ask someone to hold the line firmly while you tie knot.

4. Give the spool of the fishing line

Select a person as your helper and give him a spool of line in order to put the spool on the blade of a screwdriver. Putting the screwdriver through the eye of the spool let him hold firmly. It is necessary when spooling a reel fishing line comes in the same direction that it goes on the baitcasting reel.

5. Reel the line as an important step

In this step, you need to reel the fishing line on the baitcasting reel. In this case use your index finger and thumb to put slight tension on the line or ask your helping hand to put some tension when you start to retrieve. This will ultimately help in keeping straight and tight the fishing lines as you reel it. This is an important factor that will help your fishing line to avoid bird nests t the time of fishing.

Pro-tip: While following this step you must make sure that the fishing line is rolled tightly on the reel otherwise it will not help in fishing.

6. Make a cut on the line

When you get the full line on the reel make a cut with the help of pliers using on the fishing line. You can easily fill the spool from top with 1/8 inch gap.

7. Test the rod

This is the last step that we are following for putting fishing line onto your baitcasting reel. Once you finish all the steps, now you are to ensure yourself whether the fishing rod is working smoothly with new fishing line that has been reeled in your baitcasting reel. If you find everything okay you can go for casting lines in the water to catch fish.

For better understanding and knowledge you can enjoy video from youtube link “how to put fishing line onto a baitcasting reel.” If you follow these simple steps on how to put fishing line on a baitcasting reel you can easily save some money without going to a professional.

When you gather experience from a professional or veteran angler regarding putting fishing line onto your baitcasting reel you will be tempted to believe it is straightforward. Then you need to purchase a fancy baitcasting reel for yourself.

The reality is that most of the beginners are wondering how to manipulate the equipment for a good effect. Many people think that their baitcasting reel is a basic fishing equipment due to their ignorance.

This is a shame that these reels cost much money and they offer quite a lot of benefits. For example this baitcasting reel gives you better handling capacity while fishing a big catch. Also you need not to waste your energy for catching a fish.

It will be comfortable for while you are casting lines again and again for the whole day. Spooling baitcasting is the thing to learn yourself before buying it. In fact there are basically many techniques but the most popular are manual spooling and spooling station.

Manual spooling:

1. Tie the fishing line around the baitcaster’s spool.

You should not try a fancy or complicated knot. It is noted that a medium tight knot is far better than a loose knot or a simple slip knot is just fine. Sometime for bigger fish you need a complicated knot.

2. Reeling the line around the spool.

After tying the knot safely, the next step is to reel the line around your baitcaster’s spool. First of all ensure yourself whether the lines pass through all the line guides. It will be far better if someone helps with a pencil or a screwdriver to accomplish the job.

This way you can reeled off smoothly. Hold the line between your index finger and thumb before you start reeling. Start cranking the wheel to reel the line in. In this position use smooth consistent hand motion and look for smooth and evenly spread over the spool. Be careful not to overfull the spool. Always try to avoid birds nest while casting lines.

Spooling Station

If you have money then you can buy a spooling station. This equipment helps you to easily put the lines on a baitcasting reel. You can buy easily online that comes in various designs and prices. The major difference between the two is that when you use spooling station you need not take any help from other person. You need to do only:

1. Tie one end of the fishing line with a simple knot on the baitcasting spool.
2. Attach a baitcaster to one end of the spooling station and the fishing line of the on the opposite end. You can easily adjust the line connection in order to give you required tension.
3. Then you need to start cranking the wheel in order to reel the fishing line onto the baitcaster’s spool. Stop just a few inches from the top of the spool as explained earlier.